The R300-E from Electro-Voice features the HM-3 Omni-directional headworn transmitter for clear, consistant vocals.
Unique features like One-Touch ClearScan and EZsync make the R300 quicker and easier to set up and use than any other similarly priced wireless system, while its rack-mountable metal receiver, sturdy metal bodypack and handheld transmitters, and remote-mountable antennas are of a build and performance quality usually reserved for the highest-end professional products. This combination of value, professional features, and road-ready ruggedness make the R300 a perfect choice for a wide range of wireless applications, from live vocals and instruments to professional presentations.
BP-300 is an all new metal bodypack transmitter that is rugged, compact, and easy to use. Using two AA batteries for 14 hours of use, the BP-300 is one of the most economical transmitters around for applications that require daily operation. The mute function keeps the RF signal live while it mutes the audio to protect your channel and prevent noise in the audio system.
The TA4 connector allows the use of any EV lapel or headworn microphone for a variety of applications. The receiver for the R300 system is equally at home on a table top or in a 19 inch equipment rack. Rack mount kits and front mount antenna cables are available for the R300 for a professional installation.
For applications with up to 4 receivers in one rack, the APD4+ antenna splitter can provide antenna and power feeds as well.
Designed for Club Sound, House of Worship, Performance & Sports Venues, and other applications.
ClearScan finds the clearest channel available with the touch of one button
EZsync infrared channel transfer from the receiver to the transmitter for easy and error-free setup
14 hour battery life from two AA alkaline batteries
Rugged metal transmitters with backlit LCD display and battery gauge
32 preset channels, with compatible groups of 8 channels for simultanious use
Bodypack with TA4 connector – compatible with all Electro-Voice lapel and headworn microphones for easy upgrades
Detachable half-wave receiver TNC antennas allow for use with the APD4+ antenna distribution system
Metal receiver chassis with optional rack mount ears and front mount antenna cables
HM-3 Omni-directional headworn for clear, constant vocals
Antennas – Flexible TNC 1/2 Wave
Audio Frequency Response – 80 Hz – 18kHz +/-2dB
Balanced Line Level Output – (RMS Adjustable) 10 – 100 mV
Battery Life – 14 hours with (2) AA alkaline typical
Case Material – Metal
Connector Type – 1/4 inch unbalanced, 3-pin XLR balanced
Controls – on/off, Set, Up, Down, Sync
Distortion – (@ 1 kHz, 40 kHz deviation) Less than 1.0, 0.4 typical %
Diversity – True Antenna
Dynamic Range – Greater than 95 dB
Element – HM-3 Omni-directional headworn
Number of Channels – 32 per band, 8 Simultaneous
Power Supply – 12 VDC, 500mA max
Receiver Type – Synthesized PLL Agile UHF
RF Frequency Range – 16 MHz
RF Output – 8 mW typical
RF Sensitivity – (12 dB SINAD) less than 1.0 uV
Signal-to-Noise Ratio – (A-weighted) greater than 100 dB
Squelch – Tone code plus Amplitude